Super Chief Xtra Set 5 Amp

Super Chief Xtra Set Includes:
• DCS100 Command Station/Booster With Intelligent AutoReverse
• DT402 Super LocoNet Throttle (Infra ready)
• UP5 Universal Panel
• One LT1 LocoNet Cable & Decoder Test Kit
• Super Chief Xtra Manual
• Digitrax Decoder Manual

The DT402 Super Throttle & DCS100 Command Station Offers:
• A user interface that makes DCC simple.
• Dual throttle knobs give you control of two locos at the same time and makes consisting easy.
• Full numeric key pad for loco selection, function control and decoder programming.
• Simplified 4 digit addressing.
• Easy address browsing and selection.
• User friendly text messages to guide you.
• Click encoders for smooth speed control.
• Multi-line LCD display puts all information at your fingertips.
• Convenient step-by-step throttle option set up
• Infra-ready out of the box (with UR90 sold separatly).
• 5 Amp Duplex Radio version also available.
• Ready for transponding and cab signaling.
• Simplified throttle option setup.

Big System Capacity for Big Layouts:
• Run up to 120 addresses at the same time on your system.
• Run up to 120 throttles at the same time on your system.

Over 9000 Locomotive Addresses:
• Address 00 for operation of one loco or MU consist without decoders
• Two Digit Addressing is easy to use. (Address 01-127)
• Four Digit Addressing lets you use the road number of your engines as their addresses. (Address 0128-9000+)

5 Amps of Power to Run More Trains:
• Selectable Scale Voltage for Safe Operation in ALL Scales
• 8 Amp Version Also Available

Function Control:
• Control 30 functions (F0Fwd, F0Rev, and F1-F28).
• Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
• Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder capabilities).

Two DCC Outputs are Better than One!:
• Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders!
• Use one output for a braking section while the other runs the layout.

Decoder Programming
• Built in read/write programmer lets you program and read back CV values.
• Supports Paged programming (Digitrax preferred method). Also supports direct, register and ops mode programming

Consisting:
• Supports Universal consisting (Digitrax preferred method). Allows ALL locos to be consisted prototypically, even analog locos.
• Advanced consisting and Basic consisting, too!
• Nested consisting where consists can be consisted together.

Stationary Decoders, Turnout Control & Turnout Position Reporting:

• Access to stationary decoder control for turnouts and other devices.
• DT402 reports turnout position based on last command sent.
• Control 999 stationary decoder addresses.

Routes
• Turnout List/Route capability to simplify complex yard operations.

Customizable System Options
• User adjustable voltage trim.
• Turn audible warnings on or off.
• Set up purging options.
• Multi-format command station mode.
• DCS100 is the most flexible command station on the market.

UP5 Universal Panel
• Makes LocoNet hook up simple!
• 2 LocoNet jacks for hooking up your LocoNet network.
• 3 throttle jacks for hooking up throttles and other non-RailSync devices.

Expandability:
• Super Chief Xtra is just the beginning for large, complex layouts that emphasize prototypical operations.
• With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more.
• To expand Super Empire Builder Xtra for all the capabilities of the Super Chief, simply add a DCS100.

NOTE: Super Chief Xtra Sets require a power supply that is sold separately by Digitrax or may be supplied by customer.