1/10 E-Revo Brushless Black

This vehicle now includes 7 cell batteries!!!!

The Traxxas E-Revo® was designed to be “Brushless Ready.” Now, with the help of Castle Creations™, E-Revo is officially brushless equipped. Power-hungry electric monster truck racers can purchase the ground-breaking E-Revo complete with a factory-installed and programmed Castle Creations Mamba Monster™ system. This heavy-duty setup includes: Castle’s 2200kV motor for full 6S LiPo (25.2 volts max) compatibility, which gives E-Revo the ability to exceed 50mph with wheel-lifting torque and brutally quick acceleration. The Mamba Monster controller features a cooling fan and heavy-duty construction with oversized 6.5mm connectors while the motor uses a 5mm rotor shaft for added durability. Secure mounting keeps the ESC and on/off switch in place without relying on servo tape. The E-Revo requires no modifications to handle the extra power; all of the drivetrain and transmission components were designed from the start for exactly this type of high-amp, high-rpm horsepower. Super-Duty Revo®driveshafts, Torque-Control slipper clutch, an oversized steel idler gear and rubber sealed bearings are just a few of the features that make E-Revo ready for all the horsepower you can handle. Also new on the E-Revo Brushless Edition is the Traxxas TQ 2.4Ghz radio system that practically eliminates frequency conflicts while delivering the long range and reliability you expect from Traxxas.

This kit includes: integrated dual battery compartments with quick release battery doors,
Scalable battery compartments from sport packs to brutal 6S Lipo power,
dual digital waterproof steering servos which deliver 125oz-in of torque & 0.16-sec transit time, hard-anodized Teflon-coated shock bodies with tin-coated shock shafts,
TQ 2.4Ghz DSS radio system,
sealed pivot ball suspension,
sealed limited slip differentials,
hex hardware throughout,
Talon tires are featured on 3.8" black chrome Gemini wheels,
Castle Creations Mamba Monster Features
Rated for 6S LiPo operation,
low-voltage detection for LiPo use,
6.5mm gold-plated bullet connectors,
Castle Link compatible for tuning via computer using USB cable
5mm rotor shaft

This is a 1/10 scale 4WD Off road vehicle
which is 22.91 inches (582mm) in length, and 16.38 inches (416mm) in width.
The wheelbase is 14.1 inches (358mm).
It weighs 135oz (3.82kg).
The chassis is made of Molded Composite Nylon Tub with Advanced Suspension Design suspension and a Shaft-Driven 4WD drive train. The tires are Talon™ (5.75" x 3.8")
It features a Castle Creations Mamba Monster 2200Kv engine with Castle Creations Mamba Monster Forward/Reverse/Brake speed control.
The radio is a Traxxas TQ 2.4GHz
It requires two NiCad or NiMH (stick)7.2V or 8.4V (6 or 7 Cell). It will travel a speed of 35+mph (65+mph w/ LiPo Battery)
The Gear Pitch is 32-Pitch
The Wheel Size is 3.8" Gemini™ (black-chrome) with 17mm splined hex
Kit/RTR:RTR
It features precision aluminum shocks
with a ProGraphix body and Rubber Sealed Bearings.

8AA Batteries are required for the transmitter charger.